Eyebolts & Drop in Anchors
- Install the drop in anchors by drilling a hole using a carbide bit
- Drill the hole deeper than the anchor length for flush mounting
- After cleaning the hole, insert anchor by tapping a hammer until flush against the surface
- Using the drop in setting tool, drive expander plug to the bottom of the anchor
- Sold by the dozen
| Eyebolt Size | Drill Bit | Drop in Anchors | Setting Tool |
| 3/8" x 1-1/4" | 1/2" | 3/8" | 3/8" |
| 1/2" x 1-1/2" | 5/8" | 1/2" | 1/2" |
| 5/8" x 1-3/4" | 7/8" | 5/8" | 5/8" |
